TAP. PVC 4

PVC SERIES

The roller shutter TAP. PVC 4 (standard specific weight of about kg. 4,000/sq.m.) is made with self-anchoring slats (double-walled and with internal stiffening intersections) measuring 13 mm in base and 55 mm in height. The profile is equipped with a lateral "anti-unraveling" stop that serves to lock the slats.

Normally, for particular widths and colors, the use of H-shaped iron reinforcements is recommended.

This type of roller shutters meets the requirements of UNI EN 13659:2009.

For proper operation (avoid the problems of bowing), ALWAYS equip the shutter with the ALUMINIUM TERMINAL or IRON TERMINAL.

TAP. PVC 4.5

PVC SERIES

The roller shutter TAP. PVC 4.5 (standard specific weight of about kg. 4,500/sq.m.) is made with self-anchoring slats (double-walled and with internal stiffening intersections) measuring 13 mm in base and 55 mm in height. The profile is equipped with a lateral "anti-unraveling" stop that serves to lock the slats.

Normally, for particular widths and colors, the use of H-shaped iron reinforcements is recommended.

This type of roller shutters meets the requirements of UNI EN 13659:2009.

For proper operation (avoid the problems of bowing), ALWAYS equip the shutter with the ALUMINIUM TERMINAL or IRON TERMINAL.

TAP. PVC 5

PVC SERIES

The roller shutter TAP. PVC 5 (standard specific weight of about kg. 5,000/sq.m.) is made with self-clinging slats (double-walled and with internal stiffening intersections) measuring 13 mm in base and 55 mm in height. The profile is equipped with a lateral "anti-unraveling" stop that serves to lock the slats.

Normally, for particular widths and colors, the use of H-shaped iron reinforcements is recommended.

This type of roller shutters meets the requirements of UNI EN 13659:2009.

For proper operation (avoid the problems of bowing), ALWAYS equip the shutter with the ALUMINIUM TERMINAL or IRON TERMINAL.

TAP. PVC 6

PVC SERIES

ANTIGRANDINE

The rolling shutter TAP. PVC 6 (standard specific weight of about kg. 6,000/sq.m.) is made with self-clinging slats (double-walled and with internal stiffening intersections) measuring 13 mm in base and 55 mm in height. The profile is equipped with a lateral "anti-unraveling" stop that serves to lock the slats.

Normally, for particular widths and colors, the use of H-shaped iron reinforcements is recommended.

This type of roller shutters meets the requirements of UNI EN 13659:2009.

For proper operation (avoid the problems of bowing), ALWAYS equip the shutter with the ALUMINIUM TERMINAL or IRON TERMINAL.